2GIG Flood & Temperature Control Detector

Why Choose This with Smart Shield Systems

• Pro placement & testing: We position the probe/puck at true floor level (or under drip sources) and verify wet/restore and temp alerts end-to-end.

• The right model for your home: We install the probe-style FT1-345 or the puck-style FT6-345 (dual water-sensing contacts) based on location and finish.

• Clean integration: We enroll separate freeze/heat notifications and set up Alarm.com rules (texts, scenes, optional valve shutoff).

• Ongoing support: Battery replacements, seasonal pre-freeze checks, and leak automations.

Key Features

• Fast, reliable leak alerts

  • FT1-345 (probe): sends WET after ~3 minutes of continuous water; restores after ~3 minutes dry.

  • FT6-345 (puck): immediate WET alarm when water hits the top or bottom contacts; restores when dry.

• Temperature protection

  • Freeze: ≤ 41°F (5°C) (FT1: after ~5 min; FT6: after ~3 min).

  • Heat: ≥ 95°F (35°C) (FT1: after ~5 min; FT6: after ~3 min).

• Supervised, wireless security-grade RF to your panel for tamper, low-battery, and health check-ins.

• Long life batteries: CR2 (FT1) or CR123A (FT6), typically ~5 years.

Product Specifications (At-a-Glance)

• Models we deploy: 2GIG-FT1-345 (probe) and 2GIG-FT6-345 (puck).

• Radio: 345 MHz, fully supervised; separate zones/loops for flood, heat, freeze (FT6: Loop 3 = Flood, Loop 2 = Heat, Loop 1 = Freeze; FT1: Loop 2 = Heat, Loop 3 = Freeze; flood reported via external probe).

• Batteries: CR2 (FT1) / CR123A (FT6); projected ~5-year life.

• Operating environment: FT1 32–120°F; FT6 32–104°F, 5–95% RH (non-condensing).

• Open-air range (FT6): up to ~350 ft with a compatible 2GIG panel.

Popular Use Cases

• Under sinks and behind toilets

• Water heater bases and washer pans

• HVAC condensate pans and low points where water collects

Frequently Asked Questions

What’s the difference between the probe and puck styles?

FT1-345 uses a small floor probe on a cable (great for tight spaces); FT6-345 is a puck that detects drips on top and puddles underneath for dual leak sensing.

How are temperature alerts set up?

We enroll freeze and heat on their own loops so you get labeled notifications; FT1 reports after ~5 minutes, FT6 after ~3 minutes, to avoid nuisance trips.

Can it shut off my water automatically?

Yes—paired with a compatible smart water valve, a leak can close the main and notify you immediately. (Configured in Alarm.com.)

How long do the batteries last?

Typical life is about five years; your panel/app will show low battery well before replacement is needed.

What’s the wireless range?

The FT6-345 spec lists ~350 ft open air. We still test on-site and may add repeaters if needed for long runs or heavy construction.

Ready to Catch Leaks Early?

Smart Shield Systems will specify the right Flood and Temperature Detector, install and enroll it, and set up freeze/heat alerts and leak automations—so small drips don’t become big repairs.