PowerG recessed door/window contact

Why Choose This with Smart Shield Systems

• Clean, hidden look: we recess the transmitter in the frame and use the 2 mm magnet so your trim stays intact.

• Signal verified: we enroll to your PowerG panel and confirm strong supervision and tamper reporting.

• Right panel, right parts: we confirm IQ Panel / Neo / Pro compatibility, match sensor color (white or translucent), and document zone labeling for you.

Key Features

• PowerG 2-way wireless (AES-128, frequency-hopping) for robust, long-range performance.

• Ultra-thin 0.08″ (≈2 mm) magnet reduces or eliminates door drilling; can be surface-mounted when there’s ≥2 mm door-to-frame gap.

• Up to 10-year battery life (typical) on a 3 V CR2 lithium cell.

• Tamper protection and supervised wireless for maintenance alerts.

Product Specifications (At-a-Glance)

• Model: PG9307 (North America PowerG)

• Frequency / RF power: 912–919 MHz, up to +14 dBm.

• Battery: CR2 3 V lithium; up to 10 years typical life.

• Contact size: 2.66″ × 0.75″ (67.5 × 19.05 mm). Weight: ~25 g.

• Magnet size: 0.67″ × 0.08″ (17.0 × 2.03 mm) ultra-thin; magnet cover 0.51″ × 0.75″.

• Operating temp: 14–122 °F (-10–50 °C).

• Colors: White or Translucent (clear).

Compatibility Notes

• Works with PowerG-capable panels including Qolsys IQ Panel 4 / IQ Pro and DSC PowerSeries Neo/Pro; also listed by dealers for iotega and IQ Panel 2 Plus.

• Use the ultra-thin magnet to avoid drilling the door leaf when you have a ≥2 mm gap to the frame. Otherwise, recess both pieces.

Popular Use Cases

• Front & garage entry doors: hidden protection with trim-friendly magnet

• Patio & French doors / windows: recessed look where surface contacts would show

Frequently Asked Questions

What battery does the PG9307 use, and how long does it last?

A single CR2 3 V lithium cell; life is up to ~10 years in typical residential use. Your panel will report low battery.

Do I have to drill the door for the magnet?

Not always. The 2 mm (0.08″) magnet can be surface-mounted if the door-to-frame gap is at least 2 mm; otherwise we recess both parts.

Will it work with my Qolsys IQ Panel 4?

Yes—the PG9307 is a PowerG sensor and is listed as compatible with Qolsys IQ panels (as well as DSC Neo/Pro). We’ll enroll and label it for your system.

What are the physical dimensions?

The transmitter body is ~2.66″ long × 0.75″ diameter; the magnet is ~0.67″ × 0.08″ (with a 0.51″ × 0.75″ magnet cover).

Is there tamper protection?

Yes—the device supervises and reports tamper and low-battery to the panel for service alerts.

Ready for a clean, recessed install?

Smart Shield Systems will drill and fit your PG9307, use the ultra-thin magnet to protect your finish where possible, enroll it to your PowerG panel, and test supervision—so your doors and windows are protected without the hardware showing.