Supervised Wireless PowerG Indoor Siren

Why Choose This with Smart Shield Systems

• Fast, tidy installs: we use the siren’s LED signal test to lock in a GOOD/STRONG PowerG link before we mount it.

• Proper event tones & strobe: we enable the right audible patterns and visual flash for each alarm type, per your panel and local code.

• Pro integration: we enroll to your PowerG-capable system (e.g., IQ Panel / DSC Neo/Pro) and verify entry/exit beeps and arming squawks behave the way you want.

Key Features

• 2-way PowerG with AES-128 encryption, adaptive FHSS, and supervised heartbeats.

• Multiple sound types: burglary (1.4–3.2 kHz sweep), fire, CO/gas, and flood; optional entry/exit beeps and arm/disarm squawks.

• Built-in strobe light (1-second pulse) for visual alarm confirmation.

• Double tamper (front cover + wall/back) for added security.

• Local diagnostics & placement test with GOOD/STRONG/POOR LED indicator.

Product Specifications (At-a-Glance)

• Models / Bands: PG9901 (915 MHz, FCC/IC/UL/ULC), PG8901 (868 MHz), PG4901 (433 MHz).

• Sound output: 109 dB min @ 1 m (piezo); ≈85 dB @ 3 m (10 ft).

• Strobe: pulsed ~1 s; red LED status indicators.

• Power / Battery: (4) 3.6 V lithium cells, 3.5 Ah each (EVE ER18505M) in two packs; up to 8-year life (typical).

• Size / Weight: 161 × 161 × 50 mm (6-7/16″ × 6-7/16″ × 1-3/4″); ~470 g (with batteries).

• Environment: 0–49 °C (UL range); up to 85% RH (UL verified); indoor use.

Compatibility Notes

• Pairs with PowerG-capable panels, including Qolsys IQ Panel series and DSC PowerSeries Neo/Pro; we confirm firmware and enroll cleanly.

• Supports distinct event tones and strobe behavior managed by the control panel (per installation guide).

Popular Use Cases

• Hallways / main living areas: loud, centralized audible + strobe for whole-home awareness.

• Shops / offices: add an interior sounder where wiring is impractical, without pulling cable.

Frequently Asked Questions

How loud is it, really?

The manual lists 109 dB minimum at 1 m (piezo) and ~85 dB at 3 m. We also validate loudness on-site after enrollment.

Does it have a strobe?

Yes—the built-in strobe flashes during alarms (pulsed about once per second).

Can it make different sounds for different alarms?

Yes—burglary, fire, CO/gas, and flood each have distinct tones. You can also enable entry/exit beeps and arm/disarm squawks from the panel.

How is battery life so long?

It uses four 3.6 V lithium cells designed for long-life security devices; the guide specifies up to 8 years under typical conditions. Low-battery is reported to the panel.

Will it work with my Qolsys IQ Panel?

Yes—PG9901 is commonly used with Qolsys IQ panels that support PowerG; we’ll enroll and test it during install.

Want a louder, smarter in-home alert?

Smart Shield Systems will mount and enroll your PG9901/PG8901/PG4901 siren, optimize its location using the signal test, and program tones/strobe to your preference—so critical alarms are impossible to miss.